Install Or Uninstall QuickBooks in Selective Startup
Selective Startup mode installation or uninstallation of QuickBooks might be a calculated move if you run into conflicts or compatibility problems with other programs on your computer. By starting Windows in Selective beginning mode, you may isolate possible sources of interference during the installation or uninstallation process by using a minimum collection of drivers and beginning applications. Temporarily turning off startup items and non-essential services may improve the reliability and effectiveness of the QuickBooks operation.
You may use this tutorial to follow the steps involved in installing and removing QuickBooks in Selective Startup mode. These steps help you set up QuickBooks faster and cause the least amount of interruption to your system, whether you are doing so for the first time or resolving problems with its uninstallation. After reading this tutorial, you should be able to use Selective Startup mode to handle the installation or removal of QuickBooks efficiently.
Selective Startup: What Is It?
With Windows’ Selective starting troubleshooting mode, you may boot Windows with a restricted selection of drivers and starting apps. This helps in separating any software conflicts that could arise during the installation or use of applications like QuickBooks.
QuickBooks Installation in Selective Startup
One way to minimize possible incompatibilities with other software or services operating on your computer and guarantee a smooth installation process is to install QuickBooks in Selective Startup mode. To improve the stability and success of the QuickBooks installation, you may temporarily turn off startup items and non-essential services. Here is a thorough walkthrough for each stage, split down into paragraphs:
Step 1: Get Installation Ready
To avoid disruptions or data loss, it is essential to save any current work and shut down any other apps before beginning the installation process. Moreover, turn off your firewall and antivirus programs for a while to prevent any issues with QuickBooks installation.
Access System Configuration in Step Two
Press Win + R to open the Run dialog box and bring up the System Configuration window to get started. Enter “msconfig” and hit Enter. This will allow you to access the System Configuration utility and choose the General tab. Uncheck Load startup elements and choose Selective startup. This process guarantees that only the Windows components that are absolutely required for the installation of QuickBooks are loaded.
Third Step: Turn Off Non-Microsoft Services
Navigate to the Services tab in the System Configuration window. If you want to prevent important Windows services from being unintentionally deactivated, check the box labeled Hide all Microsoft services. Next, choose Disable All to turn off every non-Microsoft service that is now operating on your computer. By taking these precautions, any conflicts that can impede the installation of QuickBooks are successfully reduced.
Step 4: Restart and Apply Changes
After turning down non-essential services, apply the adjustments by selecting Apply and then OK in the System Configuration box. You’ll be prompted to restart your computer to make these changes. To continue, choose Restart. This will restart your computer in Selective Startup mode, which is best suited for installing QuickBooks independently of other programs.
Installing QuickBooks in Step Five
Find the QuickBooks installation file that you downloaded or acquired (typically setup.exe or something similar) after your computer resumes in Selective Startup mode. To open the QuickBooks Installation Wizard, double-click the installer.
Step 6: Adhere to the Installation Wizard
The QuickBooks Installation Wizard helps you follow the setup instructions. Follow the instructions to choose your installation settings (typical, custom, network, etc.) and the installation location for QuickBooks. When asked, read the licensing agreement and click “Accept.”
Step 7: Make QuickBooks Active
After the installation is finished, you will need to use your license key to activate QuickBooks. To activate the program, adhere to the given steps. Activation guarantees that you may use all of QuickBooks’ features and functions in accordance with your subscription or license type.
Step 8: Upgrade QuickBooks
It’s crucial to check for updates after installing and activating QuickBooks to make sure you get the newest features, security patches, and bug fixes. Once QuickBooks is open, choose the Help option. To download and install any available Intuit updates, choose Update QuickBooks.
Step 9: Give your computer a restart
Restart your computer to complete the QuickBooks installation, and make sure all modifications are applied when the installation and activation procedures are finished.
Restore Normal Startup in Step 10
When your machine has rebooted, reopen the System Configuration window (msconfig). Under the General tab, choose Normal Startup. To return all services and startup items to their initial configurations, make sure that Load startup items and Load system services are both checked.
Step 11: Use and Proceed Again
In the System Configuration box, click Apply and then OK to apply the changes. To restore your computer to its original initial state, restart it again. This time, all services and startup items will be enabled just as they were before the QuickBooks installation.
Step 12: Restart the firewall and antivirus
Reactivate your firewall and antivirus programs to regain complete system security and protection. This guarantees that even with QuickBooks installed and working properly, your computer will be protected from outside dangers.
Carefully following these instructions can ensure a successful installation of QuickBooks in Selective Startup mode. This method also minimizes possible conflicts and optimizes system efficiency throughout the installation process. Offering a regulated environment improves QuickBooks’s stability and dependability on your PC.
QuickBooks Uninstall in Selective Startup
If QuickBooks won’t go away because it’s conflicting with other apps or services on your computer, try uninstalling it using Selective Startup mode. By turning off unnecessary services and starting items, you may create a controlled environment that can facilitate uninstallation and reduce the likelihood of conflicts. This is possible using the Selective starting mode.
Step 1: Get ready
To avoid data loss, stop using any QuickBooks-related products and save any open work before starting the removal. Additionally, temporarily deactivate your firewall and antivirus software to prevent disruptions during the uninstalling process.
Access System Configuration in Step Two
Press Win + R to open the Run dialog box, enter msconfig, and press Enter to open the System Configuration window. This will allow you to access the System Configuration utility and choose the General tab. Uncheck Load startup elements and choose Selective startup. This will ensure that only Windows components that are absolutely required for the uninstallation are loaded.
Third Step: Turn Off Non-Microsoft Services
Navigate to the Services tab in the window for System Configuration. If you want to stop important Windows services from unintentionally being deactivated, check the box labeled Hide all Microsoft services. Next, choose Disable All to turn off every non-Microsoft service that is now operating on your computer. By taking these precautions, any conflicts that can impede the QuickBooks uninstalling process are successfully reduced.
Step 4: Restart and Apply Changes
After turning down non-essential services, apply the adjustments by selecting Apply and then OK in the System Configuration box. You’ll be prompted to restart your computer to make these changes. To continue, choose Restart. This will restart your computer in Selective Startup mode, which is designed to remove QuickBooks without requiring outside assistance.
Step 5: Remove QuickBooks
When your computer restarts, Selective Startup mode should be used; go to Control Panel > Programs > Programs and Features. In the list of installed apps, find QuickBooks, right-click it, and choose Uninstall or Change. Adhere to the QuickBooks Uninstallation Wizard’s instructions to begin the removal procedure. When asked to confirm your selection, click Remove to start the process of removing QuickBooks from your computer.
Step 6: Go back to the beginning of Your Device
Once the uninstall procedure is finished, restart your computer to ensure that QuickBooks and all related components are completely removed. By restarting your system, you can make sure that any modifications performed during the uninstallation are applied completely and that it is ready for regular use.
Step 7: Go Back to a Regular Startup
When your machine has rebooted, reopen the System Configuration window (msconfig). Under the General tab, choose Normal Startup. To return all services and startup items to their initial configurations, make sure that Load startup items and Load system services are both checked.
Step 8: Use it and Start Again
In the System Configuration box, click Apply and then OK to apply the changes. Once QuickBooks has been removed from your computer, restart it to put it back into regular beginning mode. This time, all services and startup items will be activated.
Step 9: Restart the firewall and antivirus
Reactivate your firewall and antivirus programs to regain complete system security and protection. This guarantees that after you remove QuickBooks, your computer will continue to be protected from any dangers and continue to work as before.
By carefully following these instructions, you may minimize possible conflicts and maximize system performance during the removal of QuickBooks in Selective Startup mode, ensuring a comprehensive and effective operation.
In summary
When customers encounter installation or removal issues because of incompatible software or services, installing or removing QuickBooks in Selective Startup mode provides a workable workaround. Set up a setup that works well for QuickBooks by turning on just the Windows components that are necessary and turning off the ones that aren’t. This method guarantees a speedier installation or removal process while also reducing the likelihood of conflicts.
Reverting to standard starting settings is essential to restoring full functionality to your system after installing or removing software in Selective starting mode. Re-enabling startup items and deactivated services guarantees that all required components are active and your computer runs smoothly. By following the instructions provided in this tutorial, you can efficiently handle QuickBooks installs and uninstallations, maximizing efficiency and reducing compatibility problems for a flawless user experience.